Types of surfboards

From Surfing Wiki
Revision as of 07:12, 10 January 2015 by WikiSysop (talk | contribs) (→‎Types)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Types of surfboards (typical sizes and shapes)

Surfboards come in all shapes and sizes, some even come with a bit of surprises. But for the most part, surfboards fall into one of a few major categories. These groups distinguish the types of surfboards by their basic shape and how they are best ridden. The most common types of surfboards today include the: shortboard, longboard, funboard, fish, gun and hybrid. There are also a number of other designs which have a small following. Here is a brief description on each of the types of surfboards.

Types

Board shortboard.png Shortboard
The shortboard surfboard design reinvented high performance surfing in the 1970s and continues to allow surfers to push the boundaries of the sport. The shortboard is usually found at a length of under seven feet long. It will have a greater amount of rocker which allows it to surf in critical sections of the wave. It is most commonly seen with sharp noses, thins rails, and either three or four fins.
Board longboard.png Longboard
This is the oldest and most traditional of modern surfboard designs. Longboards typically range from 8 feet to 12 feet long, at least 2.5 inches thick and twenty inches wide. This extra volume allows them to paddle incredibly well and catch waves with ease. A beginner should start on a longboard shape to learn wave selection, paddling technique, and turning basics. Expert longboarders are known for their smooth style, surfing in a very fluid manner.
Board funboard.png Funboard/Mini-mal
A funboard is a larger surfboards with a lot of volume but not quite that of a longboard. They typically range in from 6 feet to 8 feet long. The funboard is a perfect for surfers who want to transition to a smaller board while still maintaining additional paddling power and stability. The funboard can come in a variety of tail shapes, nose shapes, and foils. Funboards either have a single fin (like most longboards) or three fins (thruster style).
Board fish.png Fish
The fish design gained popularity in the 1970s and has origins in the knee-board. It is typically found shorter and wider than the shortboard and because of this it works very well in small mushy surf. A fish is a relatively flat surfboard with only a bit of rocker, allowing it to paddle very well and carry speed through flat sections of a wave.
Board gun.png Gun
This is the surfboard that you take out when the waves are huge. A typical gun ranges in length from 6’6” to 10’. The extra length allows a surfer to gain enough speed while paddling to catch the huge and fast moving waves. It is designed for big drops and handling very high speeds with good control. A gun will have a great deal of rocker and will most likely have three of four fins.
Board egg.png Egg
Eggs are modern surfboards of type hybrid, mixture of fish and shortboard. They usually measure between 6 and 8' in length with a profile and a more rounded tail. They are going very well for small waves and are most commonly used for fun that to do tricks. Better than the fish for rotations of rail to rail due to its curvature in ridges. It is a good surfboard for intermediate and expert level surfers.
Board hybrid.png Hybrid
A hybrid surfboard design mixes a few design elements from different board types. One common example mixes the characteristics and performance of a shortboard with the stability and tail design of a fish. This is a great board for medium size days or even just a heavier surfer who wants to surf a smaller board.
Board tow in.png Tow-in
These boards are used only by the best in big-wave surfing. Tow-in boards are small and have foot straps, allowing a surfer to be dragged into a swelling wave at high speeds by a jet-ski. These are specialized, performance boards that make large, fast waves surfable.
Board retro.png Retro
The retro is a short surfboard inspired by the designs of the ‘ 70s, with shape that can be a bit strange. They are thick, with many surface in the part of front, lesser curve, and quite short. We can find them with tail swallow or pin, with 1, 2, 3 and even 4 keels. It takes a level medium to squeeze all of the juice to the retro, and move better in small or medium-sized waves with little force. On large or very hollow waves they don’t work as well.
Board sup.png Stand up paddle
Surfboards designed to be able to move from standing at all times, both outside and in the wave. They are very wide and thick to support a person’s foot with stability. A flexible paddle which also serves to maneuver in the wave is used to propel themselves. It is a fun choice for days with small waves and with little force.

As you learn more about surfing you will hear about some other less common surfboard designs. Some that come to mind are the bonzer, mini simmons and alaia. Each of these types excels in specific conditions.

Bibliography